Ultra Flex
Get a quote

Ultraflex Skim Coat

Home Skim Coat

Ultraflex Super Skim Coat

Ultraflex Tile Adhesive (mortar) is manufactured to the highest international standards and is under SLS 1375 by the Sri Lanka Standards Institution. It is a high-performance, thin-layer, cementitious tile adhesive, supplied in ready-to-use form with the simple addition of water. Ultraflex is specially formulated for bonding ceramic tiles, porcelain tiles, and mosaics on all types of floors and walls.

Features
  • It can be used both indoors and outdoors. No additional polymers are required. Simply add water.
  • The easy workability of the product and non-sticky allow better levelling, hence giving the perfect finish.
  • Absorption of paint is minimal, resulting in less paint consumption. Resistant to shrinkage.

Application Instructions

Ultra Flex Skim Coat is designed for plastering on concrete surfaces, brickwalls, blockwalls and lightweight autoclaved aerated blocks. It is recommended for use as a joint mortar for brickworks, blockworks and bedding to receiving wall tiles. It is suitable for internal and external applications.
01) Mixing Instructions
  • The recommended water demand is 5 to 8.5 kg of water for one 20 kg bag of Ultra Flex Skim Coat.
  • For best results, slowly add the powder to the water while mixing. A mechanical or hand-held mixer is recommended to ensure a consistent and homogeneous mixture. Continue mixing until a smooth, workable paste is achieved.
  • Allow the prepared mixture to stand for 3–5 minutes prior to application. Only mix sufficient compound that can be used within a 1-hour working time.
02) Application and Finishing
  1. Preparation: Apply Ultra Flex Skim Coat with a hand trowel onto surfaces that are clean and dust-free.
  2. Troweling: As the surface coat begins to harden, trowel up the surface using a light, flat troweling action to achieve a dense, smooth finish.
  3. Thickness: Ultra Flex Skim Coat can be applied in a layer ranging from 1 to 3 mm in thickness.
  4. Sanding: To obtain the smoothest possible finish, sanding is recommended using 120 grit sandpaper.
03) Final Finish

Once the skim coat has thoroughly dried, the final coats, such as any wall primers or decorative paints, can be applied.

Saftey Tips

  • Store the product in a dry place.
  • Once a bag of Skim Coat is opened, seal them tight and well to prevent exposure to air.
  • In case of contact with eyes, rinse thoroughly with clean water immediately.
  • Keep away from foods. Avoid contact with eyes. In case of contact, wash with running water. Wear eye protectors and disposable respirators when sanding and provide ample ventilation during sandpapering . Keep the product out of reach of children.

Coverage Area

Generally covers 10-15 sq.ft / 01 kg.